Prep Your Snow Blower for the Coming Winter

By October 29, 2019No Comments

Snow blower maintenance in Fargo, ND is essential for reliable performance. Regular maintenance will also extend the lifespan of this equipment. As you gear up for the coming winter season, be sure to take appropriate steps to maintain your snow blower and prepare it for the work ahead.

To ensure your snow blower is ready for the season, take the following steps. Keep in mind, if you purchased your snow blower through S & S Landscaping Co. Inc., we also offer maintenance services for equipment. Feel free to contact our team for assistance.

Change the oil

At the start of each season, you should change the oil in your snow blower. This will ensure the system is properly lubricated and provides smooth operation for the season. Oil can turn to sludge inside an engine over long periods of inactivity and cold conditions can break down the molecular components of the oil.

Check the spark plug

Determine if your snow blower needs a new spark plug before you start using it for the season. In some cases, you may simply need to clean the spark plug. In others, it may need to be replaced. Look for signs of rust and corrosion. If these are present, it’s time to replace the spark plug.

Inspect the belts

Over time, snow blower belts wear out. Look for significant wear and tear to see if it’s time to replace the belts on your machine. If you need assistance with this repair, contact your local snow blower experts at S & S Landscaping Co. Inc.

Freshen the fuel

If you have any fuel left from last year, drain this and replace the fuel with a fresh supply. Include fuel stabilizer to make sure the supply stays fresh if you don’t use your snow blower for a few weeks during the season.

Tighten or loosen components

Make sure everything is secure before you run the machine for the first time this season. Tighten all nuts and bolts. Additionally, lubricate the chassis and drive to keep things running smoothly. Basically, you want to keep the loose things loose and the tight things tight

Test it

Once you’ve completed the first five steps of snow blower maintenance in Fargo, ND, start up your machine. Before heading out to remove piles of powder, let it run for a few minutes to ensure everything is functioning optimally. You may also want to run your snow blower for a

Leave a Reply